Choose another country or region to see content specific to your location.
Download Center
Enterprise
File Type
Product Series
OS
SKU / Product Name
UTC
Now in Your country: 2024-04-16 21:37:29+00:00

Easy steps to upgrade the new MAGNUS ONE Mini-PC

2021.02.04 3:30 PM

With the newly launched MAGNUS ONE, we present our latest addition to the ZBOX Mini-PC family. Packing desktop performance in a compact, modular design, with only 8.33 liters of capacity; The MAGNUS ONE is fueled by a dedicated ZOTAC GAMING GeForce RTX 3070 graphics and 10th generation Intel Core i7 processor. Or simply put: Very fast and very small.

With the ZOTAC ZBOX Mini-PCs, we have always maintained the tradition of making upgrading the Mini-PC as easy as possible. We continue this tradition with our latest model, the ZOTAC ZBOX MAGNUS ONE Mini-PC.

The MAGNUS ONE is available in Europe as a barebones variant.  That means it is shipped without memory (RAM) and storage (HDD, SSD). This allows you to decide for yourself what capacity of RAM, SSD and/or HDD will best suit your tasks and applications.

In this blog, we will show you how to install the components into the system in just a few steps.

If you already have experience with upgrading a PC, you can find a time-lapse video here:

 

Note: You will need a small crosshead screwdriver for the M.2 SSD. It's best to have it at hand.

 

1. Opening the computer

After unpacking the MAGNUS ONE, you have to open the Mini-PC to access the hardware.

On the back, above the USB and video ports, there are two black screws, the so-called thumbscrews, which you can loosen without tools. Then you push the upper cover backwards and take it off. You will see an arrow with the word "PUSH" on the cover, so you know in which direction the cover has to be moved.

The side panels can now be easily removed upwards and allow you to see the inner workings of the MAGNUS ONE.

 

2. Insert memory

Above the CPU cooler are the two SODIMM RAM slots, which together support up to 64 GB of DDR4 RAM. Insert the RAM sticks in the correct orientation and press lightly until the white clips on both sides snap into place.

 

3. M.2 SSD / Intel Optane

Before we can insert the M.2 SSD or Intel Optane memory, we first need to remove the SATA bracket. This is this black bracket to the right of the CPU cooler. This is attached with only one screw, which can also be loosened without tools.

After removing the bracket, we can now see the two NVMe M.2 slots to the right of the RAM. Further down, below a black square, is a silver screw to hold the SSD in the right position later. This screw also must be loosened with the crosshead screwdriver.

After that, the M.2 SSD can be inserted into the NVMe slot at an angle of about 45°. Press the M.2 SSD down and fix it with the silver screw. The same applies to the 2nd M.2 SSD or the Intel Optane memory.

 

4. SATA SSD / HDD

Basically, you can never have enough memory. Therefore, it is recommended to use a larger and, when compared to the M.2 SSD, cheaper SATA SSD or HDD. The SATA SSD or HDD has to be inserted into the holder, which you have removed before. Make sure that the hard drive's connector is on the opposite side of the screw. Insert the hard drive with the bracket into the slot provided and fix the bracket with the screw.

 

 

5. Close the system

Now that all components are installed, the MAGNUS ONE can be reassembled. Re-insert the side part of the housing, put on the top cover, and finish off with the two black screws. In principle, the same as 1st step, only in reverse.

The special thing about the MAGNUS ONE is that the graphics card can theoretically be replaced as well.

The graphics card is located on the other side of the PC, i.e. behind the mainboard. You only have to remove the screw on the back panel, the power cable (2x 8-pin) and the clip on the PCIe slot. The graphics card can then be removed. When upgrading the graphics card, however, the size of the card as well as the power supply must be considered, as it supplies up to 500 watts. This is to ensure that the new graphics card fits into the MAGNUS ONE and is also supplied with sufficient power. Please always observe the specifications of the respective graphics cards.

Finally, install Windows with a USB stick or an external hard drive, install the necessary programs and games and you're ready to go.

And do not forget: Register the MAGNUS ONE here at ZOTAC.com and get an additional 2 years on top of the 3-year warranty, for a total of 5 years extended warranty.

Share to
View Discussion

Open Apps wechat and Scan the above QR code.